A Small Gathering @ LRS...

Well, I've slowly and I emphasis slowly painting some MRRC figures to fill the recently aquired Carrera double-decker grandstands. I go on record now by saying, "Painting little plastic figures absolutely sucks!!!" I really need a light magnifier to do these. However, they are decent enough for now. Later, I might do the additional washes to bring out the detail more. This already represents hours of my life that have gone by.

I used a toothpick to do the eyes and lens of the shades.

I also mixed my own colors for the clothing and accesories.

I did do a wash of sorts on the Grease Monkey. He had to be dirty.

The Marshalls and yes, every corner has a yellow flag. The 4 right flags were made from a piece of wire and a print our of color on the PC. It works for me.

I got a long way to go for a good sized crowd. A club memeber said that I've got the Practice Session crowd right now. The good thing is they can be added little by little. I see pre-painted Carrera figures in my future to save the cross-eyed headache of painting them myself.

I also used the same self-stick vinyl as I did on the grandstand to do a finish line effect with 1/2 inch white squares. I like the look and hope they hold up to the cars and guides rolling over them.

Long Time, No Updates...

I've slowly been working on scenery items and deciding how I want to do those scenery items. I finished painting the table top green. I decided on a Carrera Grandstand. The double decker with the VIP Box up top. I've figured out where the pits are going to eventually be and will be aquiring the double door Carrera Garages and the VIP Boxes that fit on top of them down the road.

I got lucky with the bottom 1/2 since it was given to me by my buddy Shawn and the top 1/2 was a great deal at $25 shipped. I had planned on painting them because they're just too white for my tastes. Luckily, Shawn had already painted the one he gave me grey as I planned on do them to begin with. However, he used the small can of Testors primer to do it. So, I had to either repaint it or bite the bullet and match it with the Testors at $4.00 a can. I hit Michael's 3 nights in a row coming home from work with one of their 40% off coupons each time. Every dollar saved adds up in the long run. I also lucked into about 5 cans of Testors in various colors in the clearance section at $1.49 each. Bonus!!!


Moving on to the issue with these Grandstands. I hate the seat stickers that came with them and Shawn's had faded big time and wouldn't have matched the new section. Plus, I don't have too many people. (Thanks Matt for what I do have) So, how can I jazz them up with a smaller crowd? I went to the real world for inspiration or madness depending upon your outlook. I purchased some white self stick vinyl for the Cricut machine the Mrs. has with the thinking it was going to do the cutting of 178 1 inch squares for me. She already had the black vinyl. Figured out where this is heading yet? Checkered flag seats!!!

The problem was that the cutting blade and matt that holds the vinyl in place needed to be replaced and that was another $20. I opted and chose to do it by hand. So, using the straight line cutter she had for her crafting projects I cut the 178 squares. I then had to remove the stickers from the one Shawn gave me and it was a pain in the ass. Then out came the tweezers and a very sharp Xacto knife to cut the vinyl from around the stair section. 2 days and who knows how many hours later, I ended up with this.

I still need to paint the sides of the roof grey to match and I'm thinking about paint the roof a flat red. It will need custom Welcome to Legion Region Speedway stickers for the advertising space too. Plus, all the little people I still have to paint by hand...UGH!!!

Then with the help of my Dad these came into play next. What are they? A little support, that's what they are. I have Ninco walls with the fencing and wanted to add them to my layout. They look great, but more importantly they work. The problem is that I'm running Scaley Sport track. So, the tabs that lock them into place don't work. I also, didn't want to damage the walls with nails or screws to hold them in place.

So, we came up with the wooden supports that have a groove that allows 2 wall ends to slide into the groove and be held in place by clear silicone. Then it was just a matter of screwing the support to the table.

Tell me that doesn't look cool. I dare you!!!

It will look even better once the trees are put behind it.

Layering = Visual Depth...pure and simple.

Here's the overall shot as it looks today. I still need to decide on how I'm going to make my other walls around the track. I want to paint a track logo in the big open green area in front of the grandstand. The monitor is where the grandstand will end up once it's replace with a LCD TV/Monitor. It's slowly getting there folks.